ASME B16.5 flanges
Valve Product Description
ASME B16.5 flanges valve Standard technical parameters Body material:304,316,316L Spool material: 304,316,316L Seat material: PTFE,F46 Nominal size: DN15-DN100mm Applicable temperature: PTFE:-30℃~180℃ F46: -30℃~220℃ Actuator must be used stainless steel material Ambient temp.:-30℃~80℃ Nominal pressure: 1.6Mpa Connection type: Flange Design standard: GB, ANSI, DIN, ISO Control type: Single acting, air to open type Single acting, air to close type Double acting Actuator material: Polyamide PA, stainless steel Optional accessory:
Solenoid Valve, limit switch box, positioner, etc.
Size | Inch | Inner diameter | Kv Value | The max. pressure differential | Air supply | The cylinder bore | Flow direction | |
|
DN10 | 3/8’ | 10 | 3.7 | 0-16bar | 4-7bar | 50 | Steam, gas, Flow above seat | |
DN15 | 1/2’ | 15 | 4.2 | 50 | |
DN20 | 3/4’ | 20 | 8.0 | 50 | |
DN25 | 1’ | 25 | 19.0 | 63 | |
DN32 | 1-1/4’ | 32 | 27.5 | 63 | |
DN40 | 1-1/2’ | 40 | 42.0 | 63 | Liquids, gas Water hammer-free Flow below seat | |
DN50 | 2’ | 50 | 55.0 | 80 | |
DN65 | 2-1/2’ | 65 | 90 | 100 | |
DN80 | 3 | 80 | | 100 | |
DN100 | 4 | 100 | | 125 | |
Pneumatic Actuator working principle
Control mode: According to the site condition has the following three kinds of control mode, the reasonable selection of the control method can make your valves service life more longer, more convenient operation, cost savings. Normally open type user: Suitable for
Pneumatic Valve in the working time longer occasion. When the valve is normally open spring does not load external gas source thrust, then the valve fatigue to a minimum. Because it is by the air pressure to close valve, so need filed air pressure stability, air supply reliable. Normally closed type user: Suitable for pneumatic valve is in the closed time working longer occasion. For depends on the spring to close, when air pressure to drive the piston push spring, valve open. So for the normally closed user this valve service life more long, gas more economical. At the same time when the air supply fails, the valve is in the closed state, this control state is the most widely used. Double acting type user: Double acting type refers to the two chambers can be input compressed air separately, realize the two-way movement of the cylinder, no spring in the cylinder, the valve opening and closing rapidly, and can be used for large stroke valve, because it is by air pressure to close valve, so need the field gas source stability, air supply reliable. Workshop
Certifications Certifications We have CE and RoHS certificate,the ISO9001 certificate is under processing.
Our clients
FAQ Q: How much is our minimum order quantity? A: Our minimun quantity is 1 Piece. Q: What's your business scope? A: Our business scope is air cylinder,air source treatment ,air solenoid valve ,motorize valve , pneumatic valve ,quick fitting,etc. Q: What's your delivery date? A: It depends on the number of orders. Delivery date is 7-30 days. If you need emergency products, we can speed up the production of the first arrangement. Q: What is the price of the product? A: Our prices are based on the size and type of material, if you can give me the information, then we can give you an estimated price is for reference only. We can do any size and any color. Q: what types of products you can make ? A: We can make many kinds of stainless steel materials processing. Valve/ solenoid valve /electric valve /pneumatic valve and air cylinder products and so on. Q: How many years do you warrant? A: 18 months warranty. Q:How many years have you done valves,cylinders? A: More than 13 years. Company Information
Contact us if you need more details on Asme B16.5 Flanges. We are ready to answer your questions on packaging, logistics, certification or any
Other aspects about Ansi Angle Seat Valve、
Pneumatic Angle Seat Valve. If these products fail to match your need, please contact us and we would like to provide relevant information.
Product Categories : Pneumatic Valve > Pneumatic Angle Seat Valve